Install from a USB stick
Use this if the command on the setup page won't run, or the laptop has no working system. It replaces everything on the laptop.
1. Make the stick
curl -fsSL https://notjunk.si/ install.sh | sh
- Plug in a USB stick of 2 GB or more. Everything on it is erased.
- Open Terminal (Command + Space, type Terminal, press Return), paste the command and press Return.
- It lists only USB sticks and memory cards. Type your stick's name from the list, then your Mac password.
- Wait for Done. It reads the stick back to check every byte, then ejects it.
If the Mac then says the disk isn't readable, click Eject, not Initialize.
Download the image yourself (1.5 GB)
SHA-256: 27f5339d9d3226f3f784ea22b5fd01dc4f86157112bb4c6325973ad40532ec3b
Write it with balenaEtcher (free from etcher.balena.io) or Raspberry Pi Imager. The command reads notjunk.si/install.sh, if you want to check it first.
2. Start the laptop from it
Mac: plug in the stick, press the power button and hold Option. Pick EFI Boot.
PC: if the firmware settings have Secure Boot, turn it off. Plug in the stick, press power and tap the boot menu key. Pick the entry with USB in its name.
- Dell, Lenovo, Acer, Toshiba
- F12
- HP
- Esc, then F9
- ASUS
- Esc or F8
- MSI
- F11
- Samsung
- Esc
- Surface
- hold Volume Down
With no network cable, it asks for your Wi-Fi first.
3. Type the two words on your phone
The laptop shows two words. Open notjunk.si/enter on your phone and type them.
Intel Macs from 2011 to 2017 and most Intel and AMD PCs from about 2011 on. Apple chip Macs and Chromebooks don't work yet.